![]() ![]() This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300☌ where a silicone sock can’t be used. In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350☌), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. These blocks are engineered for ultimate high temperature performance. Easily swap your V6 heater block and nozzles to Volcano for large-scale 3D printing. Print big and fast! The plated copper Volcano upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger parts. It doesn’t have to work as hard to retract the filament, resulting in finer retraction control, which reduces stringing. Hemera features convenient T-Slots for easy mounting to your printer, plus space for other accessories, part cooling fans and bed levelling probes to name a couple. Direct drive systems provide much better and faster retraction performance because the extruder is located closer to the hot end. This exceptional filament constraint also has a significant impact on printing rigid, and semi-rigid materials such as PLA or Nylon. You won’t experience the full extent of its unrivalled filament constraint until you print ultra-flexible materials. ![]() ![]() Hemera constrains filament like no other extrusion system, fact. It has a custom motor which is based on a NEMA17, along with our own faceplate designs which has allowed us to add our own features for user convenience, such as mounting slots as well as produce a very compact system. Hemera is a system of components designed to work seamlessly together as a single compact product. The secondary gear shaft is on a moveable, sprung idler which allows the user to adjust filament tension. For E3D Hemera, we opted for a hardened stainless steel dual-drive arrangement which provides a huge boost in grip over single drive systems, in fact, we’re able to push filament with up to 10kg of force. ![]()
0 Comments
Leave a Reply. |